Couldn't load pickup availability
BLUETTI RV5 · All-in-One RV Solar Power Hub
The RV5 Power Hub consolidates an inverter, inverter charger, solar controller, alternator charger, DC system, and protection unit into a single integrated platform — 5,000W of continuous AC output (10,000W surge) and 1,620W of DC output. Pre-labeled wiring and an auto-recognition design mean most RV owners can install it with basic DIY skills, no electrician required. Rated IP65, vibration-resistant, and built to run under 50dB. Backed by a 5-year manufacturer's warranty.
The Power Hub itself doesn't include a battery — BLUETTI sells it standalone or bundled into larger kits.
Hub Only
Just the hub — for van conversions and custom builds where a battery is sourced separately.
~5kWh
Hub plus one 5,120Wh battery — fast, simple install with limited run time.
~5kWh
Adds an Epanel and Epad to the RV5+B4810 setup, for full monitoring and control.
~10kWh
Two batteries, Epanel, and Epad — built for full-time RVers and extended off-grid trips.
Runs A/C, microwave, fridge, and electronics at once, with enough surge headroom for high-startup appliances.
Inverter, inverter charger, solar controller, alternator charger, DC system, and protection unit in one platform.
Pre-labeled wiring and an auto-recognition design let most RV owners install it with basic DIY skills.
Plus up to 5,000W from shore power — 0 to 80% in about 50 minutes on shore power.
Built for the road — rough highways, long travel days, and the general wear of RV life.
Quiet enough to run in the background without the drone of a generator, with minimal idle power draw.
Monitor battery status, power usage, and charging inputs from one HD touchscreen or the BLUETTI app.
UL458-certified hardware backed by long-term coverage on defects in materials and workmanship.
Most DIY RV power setups mean sourcing and wiring together a separate inverter, solar charge controller, alternator charger, DC converter, and protection circuitry — a project that can take days and leaves plenty of room for mismatched components. The RV5 folds all of that into one hub with auto-recognition design: it identifies voltage and current on its own, and pre-labeled wiring means most RV owners can get it installed with basic DIY skills, no electrician required.
Charging stays flexible on the road: up to 1,800W from solar, 1,200W from the vehicle's alternator, or up to 5,000W from shore power (0 to 80% in about 50 minutes). One detail worth planning around — for 12V auto-leveling systems with startup currents over 100A, BLUETTI recommends pairing with a dedicated B1210 battery or the vehicle's existing 12V lead-acid battery rather than relying on the RV5 alone. The platform's real ceiling is higher than the marketed kits suggest, too: BLUETTI's own spec sheet lists a maximum expansion of 122.88kWh via parallel and series battery wiring, well beyond the "10kWh" top-tier kit.
RV5 Power Hub
| Continuous AC output | 5,000 W |
| Surge power | 10,000 W |
| DC output | 1,620 W |
| System voltage | 48V |
| Max input/output current | 150 A |
| Shore power | Up to 5,000W, 120V/42A |
| Solar | Up to 1,800W, 12–50V |
| Alternator (12V / 24V) | 600W / 1,200W, 50A max |
| 0–80% via shore power | ~50 minutes |
| Protection rating | IP65 |
| Noise | <50 dB |
| Standby power draw | ~7 W |
| Operating temp | -4–131°F |
| Storage temp | -4–104°F |
| Humidity | 95% max |
| Weight | 30.86 lbs |
| Dimensions (L×W×H) | 17.72 × 19.69 × 6.30 in |
| Max system expansion | 122.88kWh (24P, parallel/series) |
| Certification | UL458 |
| Warranty | 5 years |
B4810 Battery (sold separately / bundled in kits)
| Rated capacity | 5,120 Wh (51.2V, 100Ah) |
| Chemistry | LiFePO₄ |
| Cycle life | 6,000 cycles @ 70% capacity |
| Weight | 101.4 lbs |
| Protection rating | IP65 |
No battery is included with the Power Hub alone — see the kit tiers above for bundled options with a B4810 battery, Epanel, and Epad.
The RV5 is designed for quick, beginner-friendly setup. With pre-labeled wiring and a simplified design, most RV owners can install it with basic DIY skills — no electrician required.
No — the RV5 Power Hub is sold on its own, or bundled with a B4810 battery (and optionally an Epanel and Epad) in the 5kWh and 10kWh RV Kits.
For 12V auto-leveling systems with startup currents over 100A, BLUETTI recommends pairing with a dedicated B1210 battery or the vehicle's existing 12V lead-acid battery, rather than relying on the RV5 system alone.
Through the Epad — an HD touchscreen showing power consumption, battery status, and charging inputs in real time — or remotely through the BLUETTI app.
The marketed kits top out at "10kWh," but the Power Hub's own spec sheet lists a maximum expansion of 122.88kWh through parallel and series battery wiring — well beyond what the standard kits offer.
5 years on the Power Hub, covering defects in materials and workmanship.
Upon completing your order, you will promptly receive an email confirming the order placement, indicating that we have received your order and pre-authorized your credit card for the purchase. Our next step is to contact our suppliers to confirm the item's availability and readiness for shipment. Should the item be on backorder or unavailable, we will notify you of the estimated lead time. If the provided lead time is unsatisfactory, we will cancel the pre-authorization and contact you via email or phone. If the item can be shipped within 5 business days, we will proceed with processing the charges and shipping your order.
In the event of incorrect shipping information provided at checkout, we will make every effort to track down the item using our shipping partners. Please be aware that refunds and returns are not available in such cases. However, we will do our utmost to locate the item. If successful, re-shipping fees of up to 20% of the item's value may apply.
If your order is in stock and we have successfully processed your credit card charges, the items will be shipped within five business days from the order date. You will receive tracking information via email within 24 hours of your order leaving the distribution center. Should tracking information not be received within six days of your order, please contact us at +1 (307) 317-7213. The cut off time is 4 pm EST.
We offer free shipping on all orders and applicable items and brands within the mainland of the US (Hawaii, Alaska, and Overseas Territories are exclusions).
Eco Solar Kits does not ship orders directly to Hawaii, Alaska, or Overseas Territories. Clients needing delivery to these locations must arrange a freight forwarder and enter the forwarder’s address as the shipping address. Eco Solar Kits will then ship the order to the designated freight forwarder under our standard shipping terms.
Typically, orders are processed immediately upon receipt, taking approximately 1-4 business days after order confirmation, payment, and pick-up time to fulfill.
The delivery time via freight carrier may vary between 4-6 business days, depending on your location.
To prevent delays, frustration, and additional costs, kindly inform us of any concerns regarding the delivery to your location. It's important to note that the following situations may incur additional costs:
You can reach us using the contact methods provided below:
At D&D Eco Power Goods LLC, we strive to ensure our customers are completely satisfied with their purchases. Our return and refund policies are designed to provide a fair and transparent process based on the delivery date of your item.
You have 30 days from the delivery date to initiate a return. To be eligible for a return, the item must meet the following conditions:
Items that do not meet these conditions will not be accepted for return.
To begin the return process, please follow these steps:
We prioritize customer satisfaction and aim to provide a seamless refund experience. This refund policy is based on the delivery date of your item to ensure fairness in the return process.
Refunds will be processed based on the delivery date of the returned product. Once the manufacturer receives and inspects your returned item, we will notify you regarding the approval or rejection of your refund. If approved, the refund will be processed through your original payment method, typically within 10 days. Please note that it may take some time for your bank or credit card company to process and post the refund.
For any questions or concerns regarding our return or refund policy, please do not hesitate to contact us:
