Bluetti Solar Panels

Bluetti Solar Panels: Picking the Right Folding Panel for Your Station

Bluetti solar panels are foldable monocrystalline panels made to recharge Bluetti power stations in the field, at a campsite or on a driveway during an outage. Each one folds into a carry case with a handle, stands on a built-in kickstand and connects straight to the station's solar input. The choice comes down to wattage, output voltage and how much you are willing to carry.

This collection holds 4 panels: the PV120 (120W), PV200 (200W), PV350 (350W) and PV420 (420W). The 200W and 350W models are in stock; the 120W and 420W are sold out at the moment. Prices run from $249 for the 120W panel to $799 for the 420W panel, and all four use 23.4% efficiency cells.

How to choose solar panels for Bluetti stations

• Wattage against station capacity. A 200W panel in five good sun hours returns roughly 700 to 900Wh, which refills a 1,000Wh class station in a day but only tops up a 2,000Wh unit. For a 2,000Wh class station, a 350W panel or two 200W panels is the practical minimum. The Bluetti 350W 48V Portable Solar Panel is the single-panel choice for those larger units.
• Output voltage. The 120W and 200W panels run at 24V; the 350W and 420W run at 48V. Check your station's solar input voltage range before doubling up panels in series, since two 48V panels in series may exceed the limit on smaller units.
• Portability. The Bluetti 200W 24V Portable Solar Panel is the balance point: light enough for one person to set up in a minute, and enough output to keep a fridge running through a camping weekend. The 350W and 420W panels are wider when open and suit a driveway or RV site more than a hike-in campsite.
• Warranty. The 200W panel carries a 2-year warranty; the 120W, 350W and 420W carry 1 year.

Popular picks in this collection

Setup and usage tips

• Use the Solar Kit Calculator with your appliance list and ZIP code to see how many panel watts you need to break even each day in your region.
• Angle the kickstand so the panel faces the sun directly and re-aim it at noon and mid-afternoon. A flat panel at 3 pm can lose half its output.
• Keep the whole surface clear. Shade on one fold of a bluetti 200w solar panel drops the output of the entire panel, not just that section.
• Do not exceed your station's maximum solar input. If the station accepts 500W, a 350W and a 200W panel together still fit; two 420W panels do not.
• Fold the panel with the cell side inward and store it dry. The case protects the cells, but grit between folds scratches the surface over time.
• Bring the station and panel close together and use the supplied cable. Long extension runs at 24V lose a noticeable share of the power.

Frequently asked questions

Which are the best solar panels for Bluetti home backup use? The 350W panel, or two of them if your station's input allows it. Home backup means refilling 2,000Wh or more per day, and 200W alone will not keep pace in winter.

Can I use these bluetti solar panels 200w models with a non-Bluetti station? They output standard DC and work with any station whose solar input matches the voltage and connector. Confirm the input range on your unit before ordering.

How do I connect two panels? Parallel keeps the voltage the same and doubles the current; series doubles the voltage. Most Bluetti stations want parallel for two 24V panels. Call us if your manual is unclear.

Every panel ships free to the mainland US from brand partner warehouses, usually within a few business days, with 30-day returns. If you are not sure whether 200W or 350W matches your station, call and we will check the input specs with you.