Anker SOLIX F3000 Portable Power Stations

Anker Portable Power Station F3000: Every Configuration Compared

The SOLIX F3000 is the Anker portable power station for people who need 3,600W of continuous output and want to decide later how much storage to own. The base unit holds 3,072Wh of LiFePO4 rated for 4,000 cycles and accepts 2,400W of solar. From there the same station grows by stacking BP3000 expansion batteries, feeds house circuits through a transfer switch, or cuts the power bill with a smart meter and bi-directional inlet box.

This collection carries 18 F3000 configurations, from the $1,500 standalone station to the $4,899 unit with three expansion batteries and 12,288Wh. In between sit solar generator bundles with folding or rigid panels and two home backup kits. All ship free to the mainland US.

How to choose an F3000 configuration

• How many batteries. One F3000 at 3,072Wh runs a refrigerator, lights, internet and phones through a night. Each Anker SOLIX BP3000 Expansion Battery adds 3,072Wh at $1,200, up to three per station. The F3000 + 2x BP3000 at 9,216Wh is the sweet spot for a two-day outage with a freezer in the mix.
• Whether you feed circuits or cords. The F3000 + 6-Circuit Manual Transfer Switch Home Backup Kit lets an electrician wire six circuits, a furnace blower, fridge, a few lights, so you flip a switch instead of running cords through the house. It costs $1,899, only about $400 over the bare station.
• Solar: folding or rigid. A 400W portable panel bundle suits an RV. The F3000 + 2x 440W Rigid Solar Panels gives 880W of fixed array for a cabin or shed roof at $2,400.
• Two stations for 7,200W. The double voltage hub configuration pairs two F3000 units for 7,200W and 6,144Wh at $3,199, useful when one heavy appliance is not enough.
• Daily bill savings. The Power Saver Kit adds a smart meter and bi-directional inlet box so the station discharges into the home during expensive hours. It is a use case beyond backup and priced from $1,629.

Popular picks in this collection

Sizing tips

• Start with the Solar Kit Calculator. It converts your appliance list and ZIP code into watt-hours per day, which tells you whether one, two or three BP3000 batteries make sense.
• Do not exceed 3,600W continuous. A space heater and a microwave together will trip the unit; stagger loads or go to the F3800.
• Match solar to storage. 880W of rigid panels refill a single 3,072Wh station on a good day; a 12,288Wh stack needs more array to recover overnight use, up to the 2,400W input cap.
• Budget for an electrician on the transfer switch kits. The switch itself is included; the wiring is not.
• Store expansion batteries stacked under the station, as designed. It keeps cable runs short and the footprint small.

Frequently asked questions

Can the F3000 run a 240V appliance? The F3000 configurations here do not list 240V output. For a well pump or dryer, look at the SOLIX F3800, which is rated for 120V/240V split-phase.

What is the most storage an F3000 supports? Three BP3000 batteries plus the station, 12,288Wh in total. The bundle with all three is listed here; you can also start with one and add.

Which F3000 bundle is best for an RV? The 400W portable panel bundle at $1,900, or the version with the extra battery at $2,900 for longer stays. Rigid panels and transfer switches belong on a building, not a trailer.

Every configuration ships free to the mainland US from Anker partner warehouses in a few business days, with 30-day returns. Call us if you are unsure how many batteries or which backup kit you need.