Couldn't load pickup availability
48V Off-Grid ESS · 1× Inverter / 2× Battery · Standard
This configuration pairs one EG4 12000XP V2 hybrid inverter with two EG4 280Ah All-Weather batteries into a single closed-loop off-grid system — 28.6kWh of storage and up to 12kW of continuous output. It's real capacity for a full-size home or cabin, without the wiring complexity of paralleling multiple inverters together.
Two components, pre-matched and sold as one system.
Qty 1
12,000W continuous output and 24,000W max PV input, with dual MPPT solar tracking built in.
Qty 2
14.3kWh of LiFePO₄ storage per module, IP65-rated with integrated self-heating and internal fire suppression.
Two 14.3kWh LiFePO₄ modules combine into a single closed-loop bank with enough stored energy to carry a full-size home overnight.
One EG4 12000XP V2 inverter handles the full load on its own, with 18,000W of surge headroom (5 sec) for motor starts.
Rated for direct outdoor installation, with a sealed enclosure built to handle rain, dust, and temperature swings without a dedicated equipment room.
Internal heating elements keep the batteries within operating range through cold snaps, so performance doesn't fall off in winter.
Two independent MPPT trackers pull up to 24,000W max, adjusting continuously as sunlight shifts through the day.
Batteries and inverter share live data over RS485/CANBus, coordinating charge and discharge automatically instead of running on fixed assumptions.
Each battery module includes built-in fire suppression on top of active cell balancing and standard BMS protections.
One inverter means one set of breakers and one point of communication with the battery bank — no paralleling multiple units to configure.
A single battery module covers a cabin or a light backup role; this configuration is built for something more substantial. One EG4 12000XP V2 inverter delivers 12,000W of continuous output — 18,000W surge — while two 280Ah All-Weather battery modules bank 28.6kWh of usable storage, enough for a full-size home to get through an evening or a cloudy stretch without rationing power.
The All-Weather battery line is IP65-rated with integrated self-heating and internal fire suppression, so it doesn't need a climate-controlled room the way an indoor-only battery would. Because this configuration runs on a single inverter rather than multiple units in parallel, the system stays simpler too — one communication link between inverter and battery bank, one set of breakers, one unit to monitor. The inverter itself remains IP20 (indoor/enclosed installation only) — it's the battery bank that's built for the elements here.
Per-unit values below; this configuration uses 1 inverter and 2 batteries.
Inverter — EG4 12000XP V2 (×1)
| Nominal output power | 12,000 W @ 240V |
| Surge capacity | 18,000 W (5 sec) |
| AC voltage | 120/240V, 120/208V |
| Max continuous output current | 50A @ 240V |
| Power factor | 0.99 |
| Switching time | <10 ms (single) |
| MPPT channels | 2 per unit |
| Max PV input | 24,000 W (12,000W/MPPT) |
| MPPT voltage range | 120–385 Vdc |
| Max charge/discharge current | 250 A |
| Battery voltage range | 46.4–60 Vdc |
| Efficiency (PV to loads) | 93.5% |
| Max AC input power | 24,000 W |
| AC bypass (grid / gen) | 100A / 90A |
| Rec. generator size | 6,000–15,000 W |
| Frequency | 60 Hz (50 Hz configurable) |
| Weight (each) | 104.7 lbs |
| Dimensions | 34.25 × 20.9 × 5.9 in |
| Protection rating | IP20 (indoor only) |
| Operating temp (full load) | 32–113°F |
| Max parallel units | 6 |
| Warranty | 5 years |
Battery — EG4 280Ah All-Weather (×2)
| Nominal voltage | 51.2 V |
| Chemistry | LiFePO₄ |
| kWh capacity (each) | 14.3 kWh |
| Ah capacity (each) | 280 Ah |
| Max continuous discharge rate | 10,240 W |
| Max continuous charge current | 140 A |
| Max continuous discharge current | 140A (200A / 30 min) |
| Rec. charge/discharge current | 60–140 A |
| Rec. SoC cutoff | 20% |
| Protection rating | IP65 (all-weather) |
| Charging temp range | 32–122°F |
| Discharging temp range | -4–131°F |
| Storage temp range | 32–113°F |
| Weight (each) | 308.6 lbs |
| Dimensions | 36.1 × 22.3 × 9.1 in |
| Communications | RS485, CANBus |
| Warranty | 10 years |
This same battery and inverter platform is sold in several sizes. The row below highlighted in your brand color is the configuration this page describes — everything else is shown for reference if a customer needs a different scale.
| Tier | Inverters | Batteries | Capacity | Max Output |
|---|---|---|---|---|
| Standard | 1× | 1× | 14.3 kWh | 12 kW |
| Standard | 1× | 2× | 28.6 kWh | 12 kW |
| Standard | 1× | 3× | 42.9 kWh | 12 kW |
| Large | 2× | 2, 4, or 6× | 28.6–85.8 kWh | 24 kW |
| 3-Phase | 3× | 6× | 85.8 kWh | 36 kW |
One EG4 12000XP V2 hybrid inverter and two EG4 280Ah All-Weather battery modules, pre-matched to run as a single closed-loop system — 28.6kWh of storage and up to 12kW of continuous output.
It depends on your total connected load. At 12,000W continuous (18,000W surge) it comfortably covers most full-size homes running efficient appliances, but a full load calculation is worth doing before sizing your system — particularly with well pumps, electric heat, or large HVAC compressors.
Yes — a single EG4 12000XP V2 supports up to three 280Ah All-Weather batteries (42.9kWh total) before a second inverter is needed. It's worth confirming compatibility with your existing setup before ordering additional hardware.
Yes — the EG4 All-Weather battery is IP65-rated with integrated self-heating, built specifically for direct outdoor or unconditioned-space installation. The inverter is IP20 and still needs a covered, indoor-equivalent location such as a garage, utility room, or power shed.
The batteries carry a 10-year manufacturer's warranty and the inverter carries a 5-year manufacturer's warranty — two separate coverage periods for the two components.
Yes. The inverter accepts grid and generator input in addition to solar, with a recommended generator size of 6,000–15,000W.
Given the voltages and currents involved, installation should be handled by a qualified, licensed electrician or solar installer familiar with your local code requirements.
Battery — EG4 280Ah All-Weather
Inverter — EG4 12000XP V2
Upon completing your order, you will promptly receive an email confirming the order placement, indicating that we have received your order and pre-authorized your credit card for the purchase. Our next step is to contact our suppliers to confirm the item's availability and readiness for shipment. Should the item be on backorder or unavailable, we will notify you of the estimated lead time. If the provided lead time is unsatisfactory, we will cancel the pre-authorization and contact you via email or phone. If the item can be shipped within 5 business days, we will proceed with processing the charges and shipping your order.
In the event of incorrect shipping information provided at checkout, we will make every effort to track down the item using our shipping partners. Please be aware that refunds and returns are not available in such cases. However, we will do our utmost to locate the item. If successful, re-shipping fees of up to 20% of the item's value may apply.
If your order is in stock and we have successfully processed your credit card charges, the items will be shipped within five business days from the order date. You will receive tracking information via email within 24 hours of your order leaving the distribution center. Should tracking information not be received within six days of your order, please contact us at +1 (307) 317-7213. The cut off time is 4 pm EST.
We offer free shipping on all orders and applicable items and brands within the mainland of the US (Hawaii, Alaska, and Overseas Territories are exclusions).
Eco Solar Kits does not ship orders directly to Hawaii, Alaska, or Overseas Territories. Clients needing delivery to these locations must arrange a freight forwarder and enter the forwarder’s address as the shipping address. Eco Solar Kits will then ship the order to the designated freight forwarder under our standard shipping terms.
Typically, orders are processed immediately upon receipt, taking approximately 1-4 business days after order confirmation, payment, and pick-up time to fulfill.
The delivery time via freight carrier may vary between 4-6 business days, depending on your location.
To prevent delays, frustration, and additional costs, kindly inform us of any concerns regarding the delivery to your location. It's important to note that the following situations may incur additional costs:
You can reach us using the contact methods provided below:
At D&D Eco Power Goods LLC, we strive to ensure our customers are completely satisfied with their purchases. Our return and refund policies are designed to provide a fair and transparent process based on the delivery date of your item.
You have 30 days from the delivery date to initiate a return. To be eligible for a return, the item must meet the following conditions:
Items that do not meet these conditions will not be accepted for return.
To begin the return process, please follow these steps:
We prioritize customer satisfaction and aim to provide a seamless refund experience. This refund policy is based on the delivery date of your item to ensure fairness in the return process.
Refunds will be processed based on the delivery date of the returned product. Once the manufacturer receives and inspects your returned item, we will notify you regarding the approval or rejection of your refund. If approved, the refund will be processed through your original payment method, typically within 10 days. Please note that it may take some time for your bank or credit card company to process and post the refund.
For any questions or concerns regarding our return or refund policy, please do not hesitate to contact us:
